Lab News & Scientific Highlights

Simulated strain distribution in a polymer reinforced Al cruciform sample subjected an equibiaxial load

Dislocation interactions at reduced strain rates in atomistic simulations of nanocrystalline Al

Molecular dynamics simulations of transient stress drops have been carried out in different regimes on a nanocrystalline Aluminum sample with average grain size of 12 nm. Besides confirming the interpretation of experimental results obtained during in situ X-ray diffraction, the creep simulations performed at 2 or 3 orders of magnitude lower strain rates than usual reveal deformation mechanisms that have not been observed previously.

Magnetisation switching of a 500 nm diameter Pt/Co/AlOx disc.

Time- and spatially-resolved magnetization dynamics driven by spin-orbit torques

Current-induced spin-orbit torques hold a great potential for manipulation of magnetization at ultrafast timescales. Researchers at ETH Zürich have demonstrated, using time-resolved STXM imaging at the Swiss Light Source, the influence of spin-orbit torques on the switching behaviour of Pt/Co/AlOx nanostructured elements.

Schematic illustration of lateral homo-epitaxial growth in which well-ordered zone-cast material provides a template for further deposited molecules.

Highly Crystalline C8-BTBT Thin-Film Transistors by Lateral Homo-Epitaxial Growth on Printed Templates

Highly crystalline thin films of organic semiconductors offer great potential for high-performance, low-cost flexible electronics. Researchers at IMEC Belgium have developed a new double-step thin film fabrication process that offers higher performance devices. Soft X-ray spectro-microscopy at the Swiss Light Source was used to prove that the increased performance comes from larger areas of material sharing the same molecular orientation.

Simulated strain distribution in a polymer reinforced Al cruciform sample subjected an equibiaxial load

Composite laminated cruciform design for multiaxial testing of metals

Multiaxial mechanical testing of sheet metals is far from trivial, which is mainly related to issues with sample design and fabrication. PSI scientists have developed a new methodology to produce cruciform shaped samples from thin sheet metals based on a novel bottom-up approach. A proof-of-principle experiment based on polymer lamination of an aluminum thin sheet demonstrates the effectiveness of this new approach.

Dr. Nan Xu

Dr. Nan Xu awarded SPS 2017 Prize in Condensed Matter Physics

The SPS 2017 Prize in Condensed Matter Physics, sponsored by IBM, has been awarded to Dr. Nan Xu for his excellent work on topological quantum states. Dr. Nan Xu is a joint postdoc of Paul Scherrer Institute (PSI) and the École Polytechnique Fédérale de Lausanne (EPFL).

A new RIXS analyzer scheme based on transmission zone plates

PSI scientists have developed a new type of X-ray optics that allows for analyzing the emission in resonant inelastic x-ray scattering (RIXS) experiments. The new approach combines the energy dispersion with imaging capabilities. In a collaborative effort with research groups from Göttingen and Hamburg, two new classes of RIXS experiments, energy mapping and RIXS imaging, have been demonstrated.

Highlight Fig1 small.jpg

Single-shot Monitoring of Ultrafast Processes via X-ray Streaking at a Free Electron Laser

The advent of x-ray free electron lasers has extended the unique capabilities of resonant x-ray spectroscopy techniques to ultrafast time scales. Here, in collaboration between researchers from PSI, Sorbonne Universités, HASYLAB/DESY, Synchrotron SOLEIL, CNRS, and Uppsala University, we report on a novel experimental method that allows retrieving with a single x-ray pulse the time evolution of an ultrafast process, not only at a few discrete time delays, but continuously over an extended time window.

Fig. 1 Cruciform geometries: (a) ISO standard slit geometry – SLIT-I, (b) the elliptical cross-arm steeply thinned geometry with no slits – THIN-I, (c) the circular cross-arm gradually thinned geometry with no slits – THIN-II, (d) the two-step gradually thinned geometry with slits – SLIT-THIN-I, (e) the uneven slit, circular notched and sharply thinned geometry – SLIT-THIN-II, (f) the modified ISO standard slit geometry – SLIT-THIN-III, and (g) the dog-bone geometry – DB. (h) S22 vs S11 for all the aforeme…

Stresses and Strains in cruciform samples deformed in tension

Cruciform experiments are very useful to study non-proportional strain path change behavior of engineering metals and alloys. This work studies the stress response of 6 prominently used cruciform geometries deformed under tension. Results show that for most of the cruciform samples, the gauge stresses are non-linearly coupled to the applied forces in both arms. Cruciform geometries based on the ISO standard are able to decouple these stresses but negligible gauge plastic strains are reached prior to failure.

Left: Calculated electric field enhancement of the metallic slit structure on a StrTiO3 film grown on LSAT. Center: Time dependence of various diffraction peaks during THz excitation showing the response of the atomic motions induced by the electric field. Right: Time dependence for various electric field strengths in the THz pulse, and showing a linear dependence of the atomic motions versus field strength (inset).

Moving atoms with enhanced THz pulses and tracking them with ultrashort x-ray pulses on an XFEL

Controlled motions of atoms using ultrashort electric field pulses allow to manipulated the properties of a material on ultrafast timescales. Here we show how metallic structures can be used to enhance a THz electric field pulse and track the induced atomic motions with ultrashort x-ray pulses emitted by a X-ray free electron laser.

Nonlinear electron-phonon coupling in doped manganites

We employ time-resolved resonant x-ray diffraction to study the insulator-to-metal transition that is launched via resonant excitation of an infrared-active optical phonon mode in a half doped manganite. We find that the charge order reduces promptly with a highly nonlinear (quartic) dependence on excitation fluence.

Scheme of the PolLux-STXM gas cell setup to realize precursor molecule flowing on 50 nm Si3N4 membrane surface and further in situ characterization. Two precursors were used in our experiments with metal ions in the center of the molecule: Co(CO)3NO and MeCpMn(CO)3.

Additive Nanofabrication with Focused X-rays

Metal nanostructures can be fabricated by irradiation of suitable metal organic precursor molecules with a focused X-ray beam. This novel techniques offer the advantage of energy-selective deposition by switching of the incident photon energy due to the non-linear photon absorption cross-section of the precursor molecules for resonant excitation.

ARPES recorded with right-handed circularly polarized (C+) 65 eV photons in the paramagnetic (150 K) insulating state of Ca2RuO4. Incident direction of the light is indicated by the blue arrow. Dark colours correspond to high intensities. (a) Constant energy map displaying the photoemission spectral weight at binding energy ε=E−EF=−5.2 eV. Solid and dashed lines mark the in-plane projected orthorhombic and tetragonal zone boundaries, respectively. Γi with i=1, 2, 3 label orthorhombic zone centres. S and X …

Realization of a combined band-Mott insulator

For decades, the mechanism of Mott phase in Ca2RuO4 has puzzled researchers. This material is a paradigmatic case of multi-band Mott physics including spin-orbit and Hund's coupling. Progress has been impeded by the lack of knowledge about the low-energy electronic structure. With our recent contribution, we provided-- using angle-resolved photoemission electron spectroscopy -- the band structure of the paramagnetic insulating phase of Ca2RuO4.

Better graphene nanoribbons for electronics applications

Turning the semimetal graphene into a technologically useful semiconductor is challenging. One way of opening a band gap is to cut graphene into nanometre-wide ribbons, but even atomic-level roughness at the ribbon edges can seriously degrade the mobility of charge carriers. Recent advances in on-surface chemistry have made it possible to obtain graphene nanoribbons with atomically precise edges through direct synthesis from molecular building blocks. Here, we report the synthesis, full structural and electronic characterization of 9-atom wide graphene nanoribbons with significantly improved electronic properties.

Simulated strain distribution in a polymer reinforced Al cruciform sample subjected an equibiaxial load

A Miniaturized Biaxial Deformation Rig for in situ Mechanical Testing

Researchers at PSI have developed a new unique miniaturized biaxial deformation rig, which allows to apply in-plane biaxial stress states with arbitrary stress ratios and to perform strain path changes on thin-sheet metals. The device is optimized for in situ usage inside a scanning electron microscope and at synchrotron beam lines.

Single holmium atoms on magnesium oxide. (left) Scanning tunneling microscope image and (right) magnetic hysteresis from x-ray magnetic circular dichroism.

The Smallest Magnet

Single holmium atoms adsorbed on few monolayers of magnesium oxide are extraordinarily stable magnets. They retain a significant fraction of their magnetization when the external magnetic field is switched off. This has been shown recently in a study combining x-ray magnetic circular dichroism performed at the Swiss Light Source (SLS) and at the European Synchrotron Radiation Facility (ESRF) as well as scanning tunneling microscopy. The results open perspectives of storing and processing information at ultrahigh density.

mattprl.png

Novel insulating phase in iron-pnictide materials

The first example of an insulating phase which is close to the superconducting phase in an iron-pnictide system has been recently observed in heavy Cu-doped NaFe1-xCuxAs (x > 0.3). A combined study by angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT) calculations revealed that on-site Coulomb repulsion and enhanced Hund’s rule coupling are responsible for the insulating behavior. The results show that the insulating phase in NaFe0.5Cu0.5As resembles the situation in the parent compounds of the high-Tc cuprate superconductors.

Spin-wave.jpg

A Mini-Antenna for the Data Processing of Tomorrow

The use of spin-wave signals in future information processing devices can substantially reduce power consumption over present charge current based technologies. As part of an international research venture, scientists at PSI now introduced a concept to generate spin waves with nanoscale wavelengths exploiting the driven dynamics of magnetic vortex cores in magnetic heterostructures.

Magnetic hysteresis of a submonolayer of TbPc2 molecules on magnesium oxide.

Magnesium Oxide Boosts the Hysteresis of Single-Molecule Magnets

Researchers from PSI and EPFL have demonstrated that the magnetization hysteresis and remanence of TbPc2 single-molecule magnets drastically depends on the substrate on which they are deposited. If a few atomic layers thick magnesium oxide film grown on a silver substrate is used, a record wide hysteresis and record large remanence can be obtained. Single-molecule magnets are attractive for molecular spintronics applications such as information processing or storage.

Shedding light on the origins of high-Tc superconductivity in bismuth oxides

Researchers have overcome a number of challenges in order to employ an advanced probe in the study of an unusual material, barium bismuth oxide (BaBiO3) – an insulating parent compound of a family of high-temperature superconductors known since the late 80s. In order to finally realize the experiments, the researchers grew and studied thin films of the material completely in situ under ultrahigh vacuum conditions. The results show that superconductivity in bismuth oxides emerges out of a novel insulating phase, where hole pairs located on combinations of the oxygen orbitals are coupled with distortions of the crystal lattice.

Left: Schematic view of electric dipole and quadrupole transitions probing the band like 5d and localized 4f magnetic subsystems of elemental Holmium, respectively. Middle. Time traces of the magnetic 4f and 5d response, exhibiting equal demagnetization time scales. Right: magnetic structure of elemental Ho.

Itinerant and Localized Magnetization Dynamics in Antiferromagnetic Holmium

Resonant magnetic scattering performed at the x-ray free electron laser facility LCLS (USA) has been used to investigate the magnetization dynamics of elemental Holmium. It is found that the demagnetization of conduction electrons and localized 4f magnetic moments have the same temporal evolution showing a strong coupling between the different magnetic moments.

Tailoring Novel Superconductivity

The Angle Resolved Photoemission Spectroscopy (ARPES) measurements performed on 2DEL at STO surface revealed that, at low carrier density, electrons are always accompanied by a quantized dynamic lattice deformation. Together with the electron, these phonon-cloud formed a new composite quasiparticle called Fröhlich polaron.

Schematic of a Weyl semimetal with spin polarized Fermi arcs on its surfaces connecting the projections of two Weyl nodes with opposite chirality.

Observation of Fermi-Arc Spin Texture in TaAs

The study of nontrivial topological semimetals (TSM) is an emerging subject, providing a new frontier in topological aspects beyond insulators. Here, we have investigated the spin texture of surface Fermi arcs in the recently discovered Weyl semimetal TaAs using spin- and angle-resolved photoemission spectroscopy. The experimental results demonstrate that the Fermi arcs are spin polarized. The measured spin texture fulfills the requirement of mirror and time-reversal symmetries and is well reproduced by our first-principles calculations, which gives strong evidence for the topologically nontrivial Weyl semimetal state in TaAs. The consistency between the experimental and calculated results further confirms the distribution of chirality of the Weyl nodes determined by first principles calculations.

Schematic of layer-specific electronic states in the bulk band gap of ultrathin magnesium oxide at the metal/oxide and the oxide/vacuum interfaces.

Excited states at interfaces of a metal-supported ultrathin oxide film

At the PEARL beamline, metal-supported ultrathin oxide films have been studied which are a class of materials of technological importance in various research fields such as catalysis, spintronics, or nanoelectronics.

Figure caption: Sketch of the 3D Fermi surface of d-AlNiCo (left) and its experimental cross-sections in the indicated planes (right) showing vanishing pseudogap in the quasiperiodic directions.

Fermi states and anisotropy of Brillouin zone scattering in the decagonal Al–Ni–Co quasicrystal

Quasicrystals (QCs) are intermetallic alloys where excellent long-range order coexists with lack of translational symmetry in one or more dimensions. These materials have a high potential in application as a material for a solar cells, hydrogen storage applications, heat insulating layers, and others.