Publications

  • Baranowski D, Cojocariu I, Schio L, Bolaños CG, Floreano L, Dreiser J, et al.
    Tuning transition metal-containing molecular magnets by on-surface polymerization
    Advanced Materials Interfaces. 2024. https://doi.org/10.1002/admi.202400123
    DORA PSI
  • Ghanbari R, Pashazadeh S, Sekar K, Nygård K, Terry A, Liebi M, et al.
    Painting Taylor vortices with cellulose nanocrystals: suspension flow supercritical spectral dynamics
    Physics of Fluids. 2024; 36(4): 044114 (16 pp.). https://doi.org/10.1063/5.0195130
    DORA PSI
  • Björn L, Persson Jutemar E, Melhado Mazza R, Andreasson E, Linell F, Guizar-Sicairos M, et al.
    Process-induced structures of injection-molded high-density polyethylene─Combining X-ray scattering and finite element modeling
    ACS Applied Polymer Materials. 2024; 6(8): 4852-4864. https://doi.org/10.1021/acsapm.4c00581
    DORA PSI
  • Yang J, Schlenger LM, Nasab MH, Van Petegem S, Marone F, Logé RE, et al.
    Experimental quantification of inward Marangoni convection and its impact on keyhole threshold in laser powder bed fusion of stainless steel
    Additive Manufacturing. 2024; 84: 104092 (11 pp.). https://doi.org/10.1016/j.addma.2024.104092
    DORA PSI
  • Nygård K, McDonald SA, González JB, Haghighat V, Appel C, Larsson E, et al.
    ForMAX – a beamline for multiscale and multimodal structural characterization of hierarchical materials
    Journal of Synchrotron Radiation. 2024; 31(Pt 2): 363-377. https://doi.org/10.1107/S1600577524001048
    DORA PSI
  • Krupnik L, Avaro J, Liebi M, Anaraki NI, Kohlbrecher J, Sologubenko A, et al.
    Iron-carbohydrate complexes treating iron anaemia: understanding the nano-structure and interactions with proteins through orthogonal characterisation
    Journal of Controlled Release. 2024; 368: 566-579. https://doi.org/10.1016/j.jconrel.2024.02.044
    DORA PSI
  • Conceição ALC, Müller V, Burandt E-C, Mohme M, Nielsen LC, Liebi M, et al.
    Unveiling breast cancer metastasis through an advanced X-ray imaging approach
    Scientific Reports. 2024; 14(1): 1448 (9 pp.). https://doi.org/10.1038/s41598-024-51945-4
    DORA PSI
  • Navarre C, Van Petegem S, Schlenger L, Cayron C, Hamidi-Nasab M, Esmaeilzadeh R, et al.
    Monitoring of laser-induced fast recrystallization in SS-316L through synchrotron X-ray diffraction
    Materials and Design. 2024; 238: 112628 (14 pp.). https://doi.org/10.1016/j.matdes.2023.112628
    DORA PSI
  • Silva Barreto I, Pierantoni M, Nielsen LC, Hammerman M, Diaz A, Novak V, et al.
    Micro- and nanostructure specific X-ray tomography reveals less matrix formation and altered collagen organization following reduced loading during Achilles tendon healing
    Acta Biomaterialia. 2024; 174: 245-257. https://doi.org/10.1016/j.actbio.2023.12.015
    DORA PSI
  • de Formanoir C, Hamidi Nasab M, Schlenger L, Van Petegem S, Masinelli G, Marone F, et al.
    Healing of keyhole porosity by means of defocused laser beam remelting: Operando observation by X-ray imaging and acoustic emission-based detection
    Additive Manufacturing. 2024; 79: 103880 (18 pp.). https://doi.org/10.1016/j.addma.2023.103880
    DORA PSI
  • Hamidi Nasab M, Masinelli G, de Formanoir C, Schlenger L, Van Petegem S, Esmaeilzadeh R, et al.
    Harmonizing sound and light: X-ray imaging unveils acoustic signatures of stochastic inter-regime instabilities during laser melting
    Nature Communications. 2023; 14: 8008 (14 pp.). https://doi.org/10.1038/s41467-023-43371-3
    DORA PSI
  • Esmaeilzadeh R, Hamidi-Nasab M, de Formanoir C, Schlenger L, Van Petegem S, Navarre C, et al.
    In-situ selective laser heat treatment for microstructural control of additively manufactured Ti-6Al-4V
    Additive Manufacturing. 2023; 78: 103882 (14 pp.). https://doi.org/10.1016/j.addma.2023.103882
    DORA PSI
  • Nielsen LC, Erhart P, Guizar-Sicairos M, Liebi M
    Small-angle scattering tensor tomography algorithm for robust reconstruction of complex textures
    Acta Crystallographica Section A: Foundations and Advances. 2023; 79(6): 515-526. https://doi.org/10.1107/S205327332300863X
    DORA PSI
  • Gao S, Li Z, Van Petegem S, Ge J, Goel S, Vas JV, et al.
    Additive manufacturing of alloys with programmable microstructure and properties
    Nature Communications. 2023; 14(1): 6752 (11 pp.). https://doi.org/10.1038/s41467-023-42326-y
    DORA PSI
  • Makowska MG, Verga F, Pfeiffer S, Marone F, Chang CST, Florio K, et al.
    Operando tomographic microscopy during laser-based powder bed fusion of alumina
    Communications Materials. 2023; 4: 73 (15 pp.). https://doi.org/10.1038/s43246-023-00401-3
    DORA PSI
  • Björn L, Melhado Mazza R, Andreasson E, Linell F, Lutz-Bueno V, Guizar-Sicairos M, et al.
    Scanning small-angle X-ray scattering of injection-molded polymers: anisotropic structure and mechanical properties of low-density polyethylene
    ACS Applied Polymer Materials. 2023; 5(8): 6429-6440. https://doi.org/10.1021/acsapm.3c01007
    DORA PSI
  • Tsolaki E, Corso P, Zboray R, Avaro J, Appel C, Liebi M, et al.
    Multiscale multimodal characterization and simulation of structural alterations in failed bioprosthetic heart valves
    Acta Biomaterialia. 2023; 169: 138-154. https://doi.org/10.1016/j.actbio.2023.07.044
    DORA PSI
  • Olsson M, Govender R, Diaz A, Holler M, Menzel A, Abrahmsén-Alami S, et al.
    Multiscale X-ray imaging and characterisation of pharmaceutical dosage forms
    International Journal of Pharmaceutics. 2023; 642: 123200 (10 pp.). https://doi.org/10.1016/j.ijpharm.2023.123200
    DORA PSI
  • Gh Ghanbari P, Markovic P, Van Petegem S, Makowska MG, Wrobel R, Mayer T, et al.
    A close look at temperature profiles during laser powder bed fusion using operando X-ray diffraction and finite element simulations
    Additive Manufacturing Letters. 2023; 6: 100150 (9 pp.). https://doi.org/10.1016/j.addlet.2023.100150
    DORA PSI
  • Godard P, Verezhak M, Sadat T, Mignerot F, Jacques VLR, Le Bolloc'h D, et al.
    In situ compression of micropillars under coherent X-ray diffraction: a case study of experimental and data-analysis constraints
    Journal of Applied Crystallography. 2023; 56(2): 381-390. https://doi.org/10.1107/S1600576723000493
    DORA PSI
  • Simutis G, Bollhalder A, Zolliker M, Küspert J, Wang Q, Das D, et al.
    In situ uniaxial pressure cell for x-ray and neutron scattering experiments
    Review of Scientific Instruments. 2023; 94: 013906 (7 pp.). https://doi.org/10.1063/5.0114892
    DORA PSI
  • König H-H, Holländer Pettersson N, Durga A, Van Petegem S, Grolimund D, Chuang AC, et al.
    Solidification modes during additive manufacturing of steel revealed by high-speed X-ray diffraction
    Acta Materialia. 2023; 246: 118713 (11 pp.). https://doi.org/10.1016/j.actamat.2023.118713
    DORA PSI
  • Lo Re G, Engel ER, Björn L, Guizar Sicairos M, Liebi M, Wahlberg J, et al.
    Melt processable cellulose fibres engineered for replacing oil-based thermoplastics
    Chemical Engineering Journal. 2023; 458: 141372 (8 pp.). https://doi.org/10.1016/j.cej.2023.141372
    DORA PSI
  • Silva Barreto I, Pierantoni M, Hammerman M, Törnquist E, Le Cann S, Diaz A, et al.
    Nanoscale characterization of collagen structural responses to in situ loading in rat Achilles tendons
    Matrix Biology. 2023; 115: 32-47. https://doi.org/10.1016/j.matbio.2022.11.006
    DORA PSI
  • Chen M, Simonelli M, Van Petegem S, Tse YY, Chang CST, Makowska MG, et al.
    A quantitative study of thermal cycling along the build direction of Ti-6Al-4V produced by laser powder bed fusion
    Materials and Design. 2023; 225: 111458 (11 pp.). https://doi.org/10.1016/j.matdes.2022.111458
    DORA PSI
  • Härtel M, Illgen C, Panzner T, Bruder E, Schmaltz S, Van Petegem S, et al.
    Mechanical, microstructural and in-situ neutron diffraction investigations of equi-biaxial Bauschinger effects in an interstitial-free DC06 steel
    International Journal of Plasticity. 2022; 159: 103478 (19 pp.). https://doi.org/10.1016/j.ijplas.2022.103478
    DORA PSI
  • Chen M, Van Petegem S, Zou Z, Simonelli M, Tse YY, Chang CST, et al.
    Microstructural engineering of a dual-phase Ti-Al-V-Fe alloy via in situ alloying during laser powder bed fusion
    Additive Manufacturing. 2022; 59: 103173 (10 pp.). https://doi.org/10.1016/j.addma.2022.103173
    DORA PSI
  • Pandiyan V, Masinelli G, Claire N, Le-Quang T, Hamidi-Nasab M, de Formanoir C, et al.
    Deep learning-based monitoring of laser powder bed fusion process on variable time-scales using heterogeneous sensing and operando X-ray radiography guidance
    Additive Manufacturing. 2022; 58: 103007 (15 pp.). https://doi.org/10.1016/j.addma.2022.103007
    DORA PSI
  • Pauzon C, Van Petegem S, Hryha E, Chang CST, Hocine S, Van Swygenhoven H, et al.
    Effect of helium as process gas on laser powder bed fusion of Ti-6Al-4V studied with operando diffraction and radiography
    European Journal of Materials. 2022; 2(1): 422-435. https://doi.org/10.1080/26889277.2022.2081622
    DORA PSI
  • Glerum JA, Hocine S, Chang CST, Kenel C, Van Petegem S, Casati N, et al.
    Operando X-ray diffraction study of thermal and phase evolution during laser powder bed fusion of Al-Sc-Zr elemental powder blends
    Additive Manufacturing. 2022; 55: 102806 (12 pp.). https://doi.org/10.1016/j.addma.2022.102806
    DORA PSI
  • Pfeiffer S, Florio K, Makowska M, Marone F, Yüzbasi S, Aneziris CG, et al.
    Crack-reduced alumina/aluminum titanate composites additive manufactured by laser powder bed fusion of black TiO2-x doped alumina granules
    Journal of the European Ceramic Society. 2022; 42(8): 3515-3529. https://doi.org/10.1016/j.jeurceramsoc.2022.02.046
    DORA PSI
  • Polatidis E, Shukla S, Čapek J, Van Petegem S, Casati N, Mishra RS
    Unveiling the interplay of deformation mechanisms in a metastable high entropy alloy with tuned composition using synchrotron X-ray diffraction
    Materials Today Communications. 2022; 30: 103155 (9 pp.). https://doi.org/10.1016/j.mtcomm.2022.103155
    DORA PSI
  • Ghasemi-Tabasi H, de Formanoir C, Van Petegem S, Jhabvala J, Hocine S, Boillat E, et al.
    Direct observation of crack formation mechanisms with operando laser powder bed fusion X-ray imaging
    Additive Manufacturing. 2022; 51: 102619 (11 pp.). https://doi.org/10.1016/j.addma.2022.102619
    DORA PSI
  • Ghasemi-Tabasi H, Larcher MND, Cayron C, Jhabvala J, Van Petegem S, Kalentics N, et al.
    Understanding variant selection and texture in additively manufactured red-gold alloys
    Scripta Materialia. 2022; 211: 114490 (7 pp.). https://doi.org/10.1016/j.scriptamat.2021.114490
    DORA PSI
  • Verezhak M, Van Petegem S, Rodriguez-Fernandez A, Godard P, Wakonig K, Karpov D, et al.
    X-ray ptychographic topography: a robust nondestructive tool for strain imaging
    Physical Review B. 2021; 103(14): 144107 (9 pp.). https://doi.org/10.1103/PhysRevB.103.144107
    DORA PSI
  • Polatidis E, Haidemenopoulos GN, Krizan D, Aravas N, Panzner T, Šmíd M, et al.
    The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: experimental investigation and modelling the transformation kinetics
    Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2021; 800: 140321 (10 pp.). https://doi.org/10.1016/j.msea.2020.140321
    DORA PSI
  • Sohrabi N, Jhabvala J, Kurtuldu G, Stoica M, Parrilli A, Berns S, et al.
    Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion
    Materials and Design. 2020; 199: 109400 (14 pp.). https://doi.org/10.1016/j.matdes.2020.109400
    DORA PSI